Table of Contents
Advertisement
Server System Requirements
The Secondary File Server must have the following installed.
•
A Windows 95/98 operating system.
•
Microsoft Word, Excel, and PowerPoint.
•
Internet Explorer 4.01 SP1 (this is available on the
SuperScript 4200N CD)
•
For best performance it is recommended that your server
have a minimum of 64MB RAM.
To use Pull Printing, you must
1. Set the IP Address on the printer. For instructions, see
page 73.
2.
Install the PrintAgent core software, Pull Printing Server
and/or Secondary File Server software onto a server.
3.
Configure URLs from the URL Configuration Page.
Installation on Secondary File Server
You must install the PrintAgent core software and the Pull
Printing Server software on a secondary server.
1. Insert the SuperScript 4200N CD into the CD-ROM drive
of the server and the Installer will launch automatically.
Follow the instructions.
2. When prompted, select the Administrator setup option
and click Next .
3.
When the Components list is displayed, select
PrintAgent and click the Change .
4.
In the sub-components list, make sure that PrintAgent ,
Pull Printing Server , and Secondary File Server are
selected. Then click Continue .
5.
Continue responding to the selections displayed in the
installation dialog boxes.
6.
When installation is complete, restart Windows.
note:
You can also install the PrintAgent Pull Printing
Server, and Secondary File Server software from links on
the URL Configuration Page.
After the printer has been connected to a network, use a
browser to view the Printer Home Page then move to the
Configuration Page; its location is http://<printer IP address>/
configure.html. Use the Configuration Page for entering the
52
SuperScript 4200N — User's Guide
URLs or IP addresses of the Secondary File Server. This will
configure the buttons on the Printer Home Page to point to
the PrintAgent Driver, Help files, and the PrintAgent Core
software located on the Secondary File Server.
The PrintAgent core files must be copied to the htdocs
directory after the Secondary File Server installation is
complete. However, if you want the Secondary File Server to
deliver the two server EXE files, you must manually copy
DriverlessServer.exe and
SecondaryFileServer.exe from
<CD-ROM Drive>:\Server_Files\redips_downloads
to
c:\program files\xitami\htdocs\
redips_downloads
You can manually copy the Help files from
<CD-ROM drive>:\NEC_disk\ncss42rn
to
c:\program files\xitami\htdocs\ncss42rn
(keeping the directory structures intact.)
note:
You can also install the Secondary Server
Software from a link on the URL Configuration Page.
Configuring URLs
Once the IP address is assigned to the printer, you can go to
the printer URL Configuration Page to set URLs for the
server(s).
1.
Launch your web browser and enter this URL
http://<Printer IP Address>/configure.html
This displays the printer's URL Configuration Page.
2. In the Pull Print Server text field, enter the IP Address of
the Pull Printing Server as its URL.
Pull Printing will not work unless the Pull Print Server
URL has been entered.
3. Enter the PrintAgent Server's IP address into the Print
Driver text box, Help Page text box, and PrintAgent
Software text boxes.
4.
Specify an URL as the Home Page for clients.
Advertisement
Table of Contents
Troubleshooting
