Table of Contents
Advertisement
W
3.1
INDOWS
X
Installation for Windows 3.1x
1. Boot your system and start Windows.
2. Insert the SuperScript 4200N CD into the appropriate
drive (in this example we use drive E).
3. In the Windows Program Manager, select Run from the
File menu. Windows displays the Run dialog box.
4.
Type E:\WIN31\PS\SETUP.EXE in the Command Line
field.
5.
Click the OK button. This launches the Installer.
6.
Respond to the selections displayed in the installation
dialog boxes.
7.
When installation is complete the installer will prompt
you to restart Windows.
8.
After Windows restarts, the Install PostScript Driver
From PPD dialog box appears.
9.
Select NEC SuperScript 4200N. Click on Install .
10. When installation is complete, click on Close .
Printing a Document
You can do this using the print command of the Windows
application used to create your document.
1. Open a document you wish to print.
2. Select Print from the File menu. The Print dialog box
appears.
3. Select the options you want in the Print dialog box,
including the number of copies and page range.
4. When the options are selected, click OK to print the
document.
Accessing the Printer Driver
You can access the printer driver from your application and
the Windows Control Panel.
From your application
Different applications have different methods for accessing a
printer driver. Below is one common example. If it does not
work with your application, consult your software manual.
1.
Select Print from the File menu of your application.
2.
In the Print dialog box that appears, click the Setup
button.
3.
In the Print Setup dialog box that appears, select the
appropriate SuperScript printer driver in the Printers list
and then click the Setup button.
From the Windows Control Panel
1.
In the Windows Control Panel double-click the Printers
icon.
2. In the Printers dialog box that appears, select the driver
you wish to view from the Installed Printers list. Then
click the Setup button.
Changing Settings in the Printer Driver
In the printer driver, you simply point and click to change
printer settings.
1.
In the PostScript 3 driver, select a category of settings
that you want to change by clicking its name tab.
2.
Click on any setting to select it.
3.
Click OK to save the changes you made in all property
sheets and close the printer driver.
Click Apply to save the changes you made in a property
sheet. The printer driver remains open.
Click Cancel to close the printer driver. Your changes
will not be implemented.
Setting Another Printer Driver as Default
You can change printer drivers using the Windows Control
Panel.
1.
In the Windows Control Panel double-click the Printers
icon.
2. In the Printers dialog box that appears, select the driver
you wish to use in the Installed Printers list.
3. Click the Set As Default Printer button.
4.
Click on the Close button to close the Printers dialog
box.
Windows 3.1x
39
Advertisement
Table of Contents
Troubleshooting
