Table of Contents
Advertisement
S
OFTWARE FOR
2000
The SuperScript 1400 software for Windows 95/98/2000 can
be installed either by an Easy Local Install or by a Custom
Install. The Easy Local Install will install the SuperScript 1400
Printer Driver, the Status Computer option, and the User's
Guide.
Installing Software for Windows 95/98/2000
Installing the SuperScript Series Printer Driver involves
inserting the NEC SuperScript 1400 Series Solutions CD into
your computer and following the instructions displayed on
the monitor.
To install printer software for Windows 95/98/2000:
1.
Insert the NEC SuperScript 1400 Series Solutions CD into
your computer.
note:
If the NEC SuperScript 1400 Series Solutions CD
Installer appears on the monitor shortly after the disk is
inserted, go to Step 4, if not, go to Step 2.
2.
From the desktop, double-click My Computer to open
the My Computer window.
3. Double-click the NEC SuperScript 1400 icon to start the
installer.
As an alternative, right mouse button click on NEC
SuperScript 1400 then select Open or Autoplay to start
the installer. If neither one of these methods work,
double-click Start.exe which is located on the CD.
4.
The NEC License Agreement will appear. Choose the
appropriate response.
5.
Choose SuperScript 1400, and choose Install.
6.
Choose either Easy Local Install or Custom Install.
note:
Windows 98 supports USB printing, but you must
load the driver from the SuperScript 1400 Series Solutions
CD when prompted by Windows 98 Plug 'N Play. The USB
driver is located at x:/USB/Windows98/NEC USB Printer
Port where x is the letter of your CD-ROM drive. Windows
2000 has USB support already installed.
7.
Follow the directions on the monitor.
W
95/98/
INDOWS
Removing Printer Software
Use the following method to remove the SuperScript
software from Windows 95/98/2000 computers.
To remove the printer driver:
1.
Click the Windows Start button and select Programs.
2.
Select NEC SuperScript 1400.
3.
Select Uninstall NEC SuperScript 1400 to start the
uninstall process.
To remove the Status Monitor driver:
1.
Click the Windows Start button, point to Programs, then
to NEC SuperScript 1400, and select NEC SuperScript
1400 Status Monitor Uninstaller. A confirmation
message will appear.
2.
Click Yes to begin removing the software from your
computer.
S
OFTWARE FOR
Windows NT 4.0 can be installed either by an Easy Local
Install or by a Custom Install. The Easy Local Install will
install the SuperScript 1400 Series Printer Driver and the
electronic 1400 User's Guide.
note:
Since Windows NT 4.0 does not support the NEC
1400 Status Monitor option, the only advantage to
Custom Install would be if you don't want to load the
User's Guide onto your hard drive.
Installing the Software
Installing the SuperScript Series Printer Driver involves
inserting the SuperScript 1400 Series CD into your computer
and following the instructions displayed on the monitor.
To install printer software for Windows NT 4.0:
1.
Insert the SuperScript 1400 Series Solutions CD into your
computer.
note:
If the NEC SuperScript 1400 Series CD Installer
appears on the monitor shortly after the disk is inserted,
go to Step 4. If not, go to Step 2.
Software for Windows 95/98/2000
W
NT 4.0
INDOWS
21
Advertisement
Table of Contents
