Table of Contents
Advertisement
8.
If loading paper make sure the Tension Lever on the left
front of the cassette tray is released into the hole under
the slot (H).
If loading envelopes release the lever into the slot (I).
9.
Squeeze and adjust the Back Paper Guide to the desired
paper length embossed on the inside tray bottom (J).
10. If you are loading paper adjust the Envelope Guide to its
back position (K).
H
Tension Lever
J
11. Lift the tab on the top of Side Guide 1 and slide it to the
paper size indicated on the tray bottom (L). Match the
left side of Side Guide 1 to the paper size markings on
the bottom of the tray.
Directions continued on next page.
I
Tension Lever
Envelope
Guide
K
Installing the 550-sheet 2nd Cassette (Tray 3)
Side Guide 1
L
93
Advertisement
Table of Contents
