NEC SuperScript 1400 User Manual page 77

Problem
Blank Areas If blank or faded areas appear randomly on
the page:
• The Toner Cartridge may be defective.
Remove the cartridge and check for
damage.
• Replace the Toner Cartridge if it is worn or
has reached the end of its expected life.
Smeared Back If the back of the page is smeared with toner
or dirty:
• Run an Internal Cleaning page from the
Operator Panel. See page 61.
• If the problem persists, call a service
representative to check the printer.
Corrugated Paper If the page is corrugated:
• Check the paper type and quality.
• Make sure you are using only new
undamaged paper.
• Check for contamination along the paper
path.
• Make sure the paper is not damp.
• Make sure the paper is properly loaded.
• Open the Face-Up Output Tray and print to
this tray.
• Turn over the stack of paper in the paper
tray.
Solution Problem
Damaged Print If the page is torn:
• Check the paper type and quality.
• Make sure you are using only new
undamaged paper.
• Check for contamination along the paper
path.
• Make sure the paper is not damp.
• Make sure the paper is properly loaded.
• Open the Face-Up Output Tray and print to
this tray.
• Turn over the stack of paper in the paper
tray.
Wrinkled Paper If the page is wrinkled:
• Check the paper type and quality.
• Make sure you are using only new
undamaged paper.
• Check for contamination along the paper
path.
• Make sure the paper is not damp.
• Make sure the paper is properly loaded.
• Open the Face-Up Output Tray and print to
this tray.
• Turn over the stack of paper in the paper
tray.
Scratched If scratches occur on transparencies:
• Try printing to the Face-up Output Tray
Transparency
instead of the Main Output Tray. See page
30.
Solution
Print Quality Problems 71