Printing - NEC SuperScript 100C User Manual

After cleaning the print head or executing the nozzle clearing operation, print a
"demo" page to check the print quality. If the print quality is still not
acceptable, run a print test.
To run the print test, proceed as follows:
Make sure that the print head is inserted and that there is paper in the ASF.
Press and hold the On Line key, and then press the Install Cartridge and
Form Feed keys on the operator panel until the light indicators go off.
Press the On Line key three times.
A sheet of paper will be fed into the printer and the print test will be
executed automatically.
To suspend the print test temporarily, press On Line (pressing this key a second
time will cause printing to resume).
Once the test is completed and the sheet of paper is expelled, the printer will go
automatically into ON-LINE condition.
Check the print quality of the test, making sure that all the characters are
clearly defined and complete.