Using Software - NEC SuperScript 100C User Manual

Using Software

This chapter explains how to change the printer settings by varying them in your
printer driver or using the printer set-up utility contained on the diskettes
supplied with the printer.
Your printer has a number of parameters which you can define according to your
specific requirements.
which can be defined when you install the driver.
Modifying the Settings in Your Printer Driver
The SuperScript™ 100C color printer driver supplied with your printer optimizes
all its features and functions.
then check that its default parameters are suitable for the type of document you
wish to create.
Reconfiguring the SuperScript™ 100C driver
Access to the printer parameters in the driver varies slightly, depending on your
application environment:
In Windows® 3.1/3.11:
1. Using your mouse, access Control Panel, though Program Manager and Main,
2. In Control Panel, open the Printers dialogue box, in the same way,
3. Check that your printer is selected (if not, select it),
4. Click on Setup:
In Windows® 95:
1. Using your mouse, click on Start in Desktop,
2. In the Configuration - Printers folder, highlight your printer model,
3. Click on the right button of your mouse,
4. Click on Properties, and then on the Paper tab.
At the top of the window displayed when you click Paper, are the following icons:
Automatic, Business, Photos, Art, Draft, User. Below these icons are parameters
for Paper Size, Paper Type, and Paper Source. Finally, in the lower third of the
dialog, are Number of Copies and Orientation settings.
At the bottom of the window, there are five buttons marked Clicking on the next
tab to the right, Quality, reveals the Half-toning and Print Quality settings. The
last tab, Color contains Image and Color Match parameters.
At the bottom of the window, there are six buttons marked About, Restore Defaults,
OK, Cancel, Apply, and Help, Clicking on:
About
Restore Defaults
OK
Cancel
Apply
Help
To change any parameter values, just click on the value or feature you require.
To move from one parameter group to another, just click on the appropriate folder
tab at the top of the window; the parameter group selected is activated and
displayed automatically.
When you have made the all changes you require, click on OK at the bottom of the
window, to save your new configuration and exit from the Setup environment.
Your printer driver contains most of these parameters
First install the driver (see Quick Start) and
Gives publication details of the software
Restores the default values for the all parameters,
Confirms/saves all the parameter values and exits from the Setup
environment.
Ignores any changes made and causes exit from the Setup environment,
Applies all changes made prior to selection,
Gives access to more detailed information on the individual parameters
in the current window.