NEC SuperScript 100C User Manual page 53

IBM Proprinter X24 4207/1
emulation:
Text Scale Mode
(only PCL III +)
DISABLED ENABLED
63 lines
of text
BOF = 12.7 mm
Slashed Zero
(only IBM)
Ink Save Mode
Width Type<R>
(only PCL III +)
PC Table
(only IBM)
AGM (only IBM)
BF Team Italic Portrait PS 8pts
Linea Upright Portrait PS 14pts
Linea Upright Portrait PS 12pts
Linea Italic Portrait PS 12pts
Linea Upright Portrait PS 10pts
Linea Italic Portrait PS 10pts
Linea Upright Portrait PS 8pts
Courier Upright Landscape 10cpi 12pts
Courier Italic Landscape 10cpi 12pts
Courier Upright Landscape 16.67cpi 12pts
Letter Gothic Italic Landscape 12cpi 12pts
Letter Gothic Upright Landscape 16.67cpi 9.5pts
Courier Upright Portrait
10cpi 12pts
Courier Upright Portrait 12cpi 12pts
Courier Upright Portrait 17.14cpi 12pts
Courier Upright Portrait PS 12pts
Letter Gothic Upright Portrait 10cpi 12pts
Letter Gothic Upright Portrait 12cpi 12pts
Letter Gothic Upright Portrait 17.14cpi 12pts
Affects only text,, reducing automatically the
current Line Feed setting to maintain a half-inch
(12.7 mm) non-printable area at the foot of the
page even for the maximum number of print lines per
page.
Possible ONLY with portrait orientation selected
and the Perforation
Skip feature DISABLED
66 lines
11 in
of text
(Letter size)
Indicates whether or not the zero is printed with a
diagonal slash:
disabled or enabled.
Procedure for reducing the volume of inking on
heavily printed pages in BIM mode:
disabled or enabled.
Defines the dimensions of the character/symbol
printed, according to the FONT selected (see
parameter). Some fonts are not affected:
normal; half width; half height; half width and
half height.
PC Table: determines which area of the currently
selected character set table will be used:
Table 2 or Table 1.
Alternative Graphics Mode: additional command codes
for printing graphics,, which may be used when the
IBM emulation is active:
disabled or enabled.