Basic Key Functions; Special Key Functions - NEC SuperScript 100C User Manual

Basic key functions

Function
Printer ready/Pause
Print head positioning
Paper load/ eject

Special key functions

Function
"Demo" page
Print test
Reset
Hex dump
Exit from Hex dump
Key Description
On Line When the printer is ON LINE, the On Line light
indicator is lit and the printer can process and
print data received from your computer.
When the printer is OFF LINE (pause),the print head
carriage returns to its rest position at the
physical left margin.
is off and any printing operation is suspended.
Install The first time it is pressed, the print head moves
Cartridge to the head loading position (position 4 of the
template).
head returns to its rest position (provided that the
print head lever is in the correct position
for the type of print head inserted. The lever must
NOT be forced and must be moved ONLY when the print
head carriage is in the loading position).
Form Feed Loads a sheet of paper to the Top of Form (TOF)
position.
printer, causes its expulsion to the output tray.
Key(s)
On Line held
+
Install Cartridge (at
least 2 s)
Press all three keys
simultaneously release
them only when the Power
light indicator goes off,
then press On Line
three times
On Line held
+
Form Feed (at least 3 s)
Press all three keys
simultaneously; release
them only when the Power
light indicator goes off.
then press On Line, Form
Feed and Install
Cartridge,, in this order.
On Line held +
Form Feed
The On Line light indicator
The second time it is pressed, the print
If paper is already present in the
Description
The "demo" page is printed. It
will be in color or monochrome,
depending on the type of print
head you have inserted.
The print test is printed. It
will be in color or
monochrome,,
depending on the type of print
head you have inserted.
Returns the printer to its
power on condition.
If done during data
transmission/printing, the
information is lost.
All subsequent data transmitted
to the printer will be printed
in its hexadecimal format.
This feature should be used
only under technical guidance,
as it can generate extremely
long print-outs. See Chapter 5
- Troubleshooting.
Reset