Controlling The Satellite Power Outlets Through The Master Web Server - ADDER ePowerSwitch 8XS User Manual

User Guide
5. Controlling the Satellite power outlets through the Master
Web Server
Start your Web browser and type the IP address of your ePowerSwitch Master or your VizioGuard RMS
system.
The browser displays the authentication dialog box.
Enter a user name and its corresponding password.
If you log in as system administrator, you will be able to:
- control individually all the power outlets and all the power outlets groups of the Master,
- control all the power outlets and all the power outlet groups of the connected satellites,
- display the values of all the connected environmental peripherals,
- display the connection status of the I/O extension module and the status of the dry contact
inputs.
If you log in as a user, you will be able to:
- control individually all the power outlets and all the power outlet groups for which you have the rights,
- display the values of all the connected environmental peripherals for which you have the rights.
The ON button allows you to switch to ON the corresponding power outlet or group of power outlets.
The OFF button allows you to switch to OFF the corresponding power outlet or group of power outlets.
The Restart button allows you to switch OFF the corresponding power outlet or group of power outlets.
The power outlet(s) will then be automatically switched ON after the delay defined by the administrator
during the configuration (default value is 10 sec).
Page | 10