Setting The Restart Delays; Setting The Restart Delays; Reading Out Of The Restart Delays - ADDER ePowerSwitch 8XS User Manual

ePowerSwitch 8XS

6.3.5. Setting the restart delays

This command enables to set the Restart Delay individually for each Power Outlet. The Delay value can
be between 1 and 255 seconds (4 min 15 sec).
Command to be sent to the ePowerSwitch 8XS:
TRxy=z[CR]
Reply from the ePowerSwitch 8XS:
TRxy=z[CR]
Explanations:
Parameter
x address of the ePowerSwitch
y number of the Power Outlet
z timer value
Examples:
TR31=17 Set Restart Delay of the Power Outlet #1 of ePowerSwitch #3 to 17 sec
The ePowerSwitch 8XS accepts lower case and upper case commands.
The ePowerSwitch 8XS sends its reply only after having received a valid command terminated by
the character [CR].

6.3.6. Reading out of the restart delays

This command enables to read out the restart delay individually for each power outlet.
Command to be sent to the ePowerSwitch 8XS:
TRxy[CR]
Reply from the ePowerSwitch 8XS:
TRxy=z[CR]
Explanations:
Parameter
x address of the ePowerSwitch
y number of the Power Outlet
z timer value
The ePowerSwitch 8XS accepts lower case and upper case commands.
The ePowerSwitch 8XS sends its reply only after having received a valid command terminated by
the character [CR].
Page | 15
Value
1 to 16 specifies the address of the ePowerSwitch 8XS
1 to 8 specifies the number of the Power Outlet
1 to 255 set the Restart Delay (in sec)
Value
1 to 16 specifies the address of the ePowerSwitch 8XS
1 to 8 specifies the number of the Power Outlet
1 to 255 shows the Restart Delay (in sec)
Function/Remark
Function/Remark