ePowerSwitch 8XS
6.3.9. Reading out the switching counter values of the relays
This command enables to read out the number of power up cycles of the ePowerSwitch 8XS and the
number of switching cycles (Off to On) of each power outlet.
Command to be sent to the ePowerSwitch 8XS:
Cxy[CR]
Reply from the ePowerSwitch 8XS:
Cxy=z[CR]
Explanations:
Parameter
x
address of the ePowerSwitch
y
counter
z
counter value
The ePowerSwitch 8XS accepts lower case and upper case commands.
The ePowerSwitch 8XS sends its reply only after having received a valid command terminated by
the character [CR].
Page | 17
Value
1 to 16
specifies the address of the ePowerSwitch 8XS
0
reads the number of power up cycles of the ePowerSwitch
8XS
1 to 8
specifies the number of the Power Outlet switching
counter
shows the number of power up or switching cycles of the
selected Power Outlet
Function/Remark