Plumbed In Water Supply; Showroom Prog - Miele CVA 5065 Operating And Installation Manual

Settings: Customising your machine
On
You can switch the plate warmer on
and off manually whenever you want,
independently of the coffee machine.
Off
The plate warmer will not switch on
because the coffee machine is not
supplying it with any electricity. The
coffee machine is delivered with "Off"
as the default setting.
To switch the plate warmer on
independently of the coffee machine
You can switch the plate warmer on via
the coffee machine, even without the
coffee machine being switched on.
^ Touch the OK sensor whilst the
machine is off.
^ Select "Plate warmer" and touch the
OK sensor.
^ Select "Manual - on" and touch the
OK sensor.
The plate warmer is now switched on.
To switch the plate warmer off again,
proceed as above again, but select
"Manual - off" instead of "Manual -
on".
If you have forgotten to switch the
plate warmer off, it will switch itself
off automatically after a maximum of
9 hours.
40

Plumbed in water supply

The machine is designed to be
plumbed into the mains drinking water
supply. Water is automatically taken
into the water container when the
machine is set up for a plumbed
supply. If this option is switched off the
water container has to be filled
manually.
^ Select "Settings F" from the Main
menu, and then touch the OK sensor.
Settings
Plumbed water supply

Showroom prog.

^ Touch the right arrow sensor until
"Plumbed water supply" is highlighted
and touch the OK sensor.
^ Touch one of the arrow sensors to
select "On" or "Off", and then touch
the OK sensor.
Showroom prog.
This function enables the machine to be
illuminated in a showroom situtation
without the heaters working.