Using The Coffee Machine - First Steps; Controls; Display; Before Using For The First Time - Miele CVA 5065 Operating And Installation Manual

Using the coffee machine - first steps

The following notes should help you get
to know your coffee machine before
starting to use it.

Controls

This machine has sensor controls which
react to touch. To operate the machine,
you only need to touch the relevant
sensor. There are five sensors:
s
On/Off sensor: For switching the
machine on or off
< > Left/right arrows:
For scrolling through the various
programme options
OK sensor: For confirming the
selection of a programme option
and for saving a setting
-
Hot water sensor

Display

Espresso
H I
q r
The following symbols come up in the
display in the main menu:
Espresso
q
Coffee
r
Cappuccino
H
Latte Macchiato
I
Hot milk
J
L
Milk froth
User profile for up to 9 different
n
users
16
L
J
m
n
G Maintenance programme for milk
pipework, brew unit, descaling,
rinsing
C
Settings: Customising your
machine
^ The arrow sensors are used to select
a programme option in the display.
Touch the OK sensor when the option
you want appears highlighted in the
display.

Before using for the first time

The machine must be correctly
installed and connected (see
"Electrical connection", "Plumbing"
and "Installation") before it is used
for the first time. It must then be
cleaned (see "Cleaning and care").
Remove any protective foil from the
front of the machine.

Switching on

^ Touch the On/Off sensor s to switch
on the machine.
C
When the machine is switched on for
the first few times with the master
switch, a welcome screen and some
other messages will appear briefly. The
welcome screen will be displayed each
time the machine is switched on until 5
drinks have been prepared.
Míele
Willkommen