Rinse The System; Milk Pipework; Rinse Milk Pipework - Miele CVA 5065 Operating And Installation Manual

Rinse the system

Before switching the machine off for
any length of time, the pipework, brew
system and central spout need to be
cleaned.
If you have switched the automatic
rinsing function off, you will need to
rinse the system through manually.
Place the smaller of the two containers
under the central spout.
Maintenance
H I
q r
^ Touch the right arrow sensor to
highlight the maintenance symbol
and touch the OK sensor.
^ Select "Rinse the system" and touch
the OK sensor.
^ Select "Start" and touch the OK
sensor.
The main menu will reappear in the
display after the pipework has been
rinsed. The machine can then be
switched off.
L
J
m
n

Milk pipework

All parts of the milk system need to
be cleaned thoroughly and regularly
Milk naturally contains bacteria
which proliferate rapidly with
inadequate cleaning. A dirty
machine can be harmful to health.

Rinse milk pipework

To prevent milk going off in the
machine and the pipework getting
C
clogged up, it should be rinsed
through after use. Rinsing is not a
substitute for cleaning the pipework
through at the end of the day.
H
q r
^ Touch the right arrow sensor to
highlight the maintenance symbol
and touch the OK sensor.
^ Select "Rinse milk pipework" and
touch the OK sensor.
^ Select "Start" and touch the OK
sensor.
Follow the instructions in the display.
Cleaning and care
Maintenance
L
I J
n
C
m
51