Installation; Plumbed Water Connection - Miele CVA 7445 Operating And Installation Instructions

Plumbed water connection


Risk of injury and appliance
damage if appliance is not
connected properly.
Failing to connect the appliance
properly can result in personal injury
and/or material damage.
The appliance may only be
connected to the plumbed-water
connection by qualified specialists.

Risk to health and risk of
damage due to contaminated water.
The quality of the incoming water
must conform to the requirements for
drinking water in the country where
the coffee machine is being used.
Connect the coffee machine to the
water supply.
Connection to the water supply must
comply with the applicable
regulations in the country where the
appliance is being installed. All units
and systems used to supply water to
the coffee machine must also
comply with the applicable
regulations in the respective country.
Connect the coffee machine directly
to the plumbed-water supply.
Avoid connecting the coffee machine
to a water supply in which the water
might stagnate. Otherwise, the flavor
of the drinks could be impaired.
The coffee machine may only be
connected to a cold-water supply.
The water-connection pressure needs
to be between 100 and 1,000 kPa (14.5
to 145 psi).
A water supply valve must be provided
between the stainless-steel hose and
the domestic-water supply to ensure
that the water supply can be cut off if
necessary. Make sure the water supply
valve remains easily accessible once
the coffee machine has been installed.
Connecting the appliance to the
water supply line
Make sure that the supply line is not
kinked or damaged.
A 3/4" BSP to 1/4" compression fitting
adapter is supplied with the machine.
Suitable 1/4" O.D flexible water line or
copper piping is not included.
 Remove the water connection cover
from the bottom of the back panel of
the machine.
 Take the angled side of the brass
fitting and check whether a gasket is
present. If not, insert one.
 Screw the supply line coupling nut
onto the threaded union.
 Ensure that the supply line is
correctly fitted and that it is water-
tight.
Connecting the water supply

Disconnect the coffee machine
from the power supply before
connecting it to the water supply.
Turn off the water supply at the water
supply valve before connecting the
coffee machine to the water supply.

Installation

83