Setting Automatic Rinsing; Setting Eco Mode - Miele CVA 5065 Operating And Installation Manual

Settings: Customising your machine
^ Use the arrow sensors to highlight
the temperature option.
^ Touch the OK sensor to save the
setting.

Setting Automatic rinsing

The pipework is rinsed through
automatically when the coffee machine
is switched off if the automatic rinsing
function is switched on and the coffee
machine has been used for preparing
drinks.
The machine is delivered with automat-
ic rinsing switched on.
^ Select "Settings F" from the Main
menu, and then touch the OK sensor.
Settings
Automatic rinsing
Eco mode
^ Touch the right arrow sensor until
"Automatic rinsing" is highlighted and
touch the OK sensor.
^ Touch one of the arrow sensors to
select "On" or "Off", and then touch
the OK sensor.
It is a good idea to set this
option to "On" so that the
rinse process cannot be
forgotten.
34

Setting Eco mode

Eco mode is an energy saving mode in
which the steam system for preparing
hot milk or milk froth has to heat up.
With Eco mode switched off, milk froth
or hot milk, and coffee or espresso can
be made in rapid succession. The
steam system remains heated up and
this uses considerably more energy.
^ Select "Settings F" from the Main
menu, and then touch the OK sensor.
Settings
Eco mode
Lighting
^ Touch the right arrow sensor until
"Eco mode" is highlighted and touch
the OK sensor.
^ Touch one of the arrow sensors to
select "On" or "Off", and then touch
the OK sensor.
The altered energy consumption mode
is displayed.