Adjusting The Height Of The Central Spout; Preparing Espresso And Coffee From Freshly Ground Beans - Miele CVA 5065 Operating And Installation Manual

Adjusting the height of the
central spout
The height of the central spout can be
adjusted to suit the height of the cup so
that the drink will not cool down as
quickly as it would if the spout were
further away from the cup. The crema
will also be a better quality if the coffee
does not have so far to go!
^ Slowly pull the central spout
downwards.
Preparing espresso and coffee
from freshly ground beans
You can programme the size
of portion dispensed for
espresso and coffee
according to taste (see "Programming
the amount: setting the portion sizes").
Espresso, coffee, double espresso and
double coffee are all dispensed in the
same way:
^ Place a cup under the central spout.
The coffee is always dispensed
simultaneously from both spouts.
Espresso
H I
q r
^ Select the type of coffee you want
with the arrow sensors and touch the
OK sensor once.
The machine will now grind the coffee
beans, pre-brew the ground coffee (if
the "Pre-brewing" option has been set
to "On") and the coffee will then be
dispensed from the coffee spouts.
Do not open the machine door
during the brewing process. This will
damage the machine.
To ensure that any coffee residues
from the factory testing process are
removed from the brewing system,
please throw away the first two
cups of coffee.
Making drinks
L
J
m
n
C
21