Settings: Customising your machine
Automatic rinsing
40
^ Select "Settings F" from the main menu and touch the OK
sensor.
Settings
Temperature
Automatic rinsing
^ Touch the right arrow sensor until "Temperature" is
highlighted and touch the OK sensor.
^ Use the arrow sensors to highlight the drink for which you
wish to set the temperature and then touch the OK sensor.
^ Use the arrow sensors to highlight the temperature option.
^ Touch the OK sensor to save the setting.
To remove any coffee grounds and residual milk from the
system, the water piping must be rinsed through before the
first drink of the day is prepared. If programme option "Auto-
matic rinsing" is set to "On", rinsing will start automatically
when the machine is switched on and cold. This will also
pre-heat the system because hot water is used for the rinse
process. A message will appear in the display to let you know
what is happening. The machine will also run an automatic
rinse before it switches off, if it has been used to prepare a
drink.
The machine is delivered with the Automatic rinsing
option set to "On".
To prevent water from running into the drip tray,
always place an empty cup or a jug under the
central spout before making the first drink.
^ Select "Settings F" from the main menu and touch the OK
sensor.