Table of Contents
Advertisement
Adaptec RAID Controller Command Line Utility User's Guide
LD#
Logical drive numbers for two or more logical drives to be concatenated into the RAID volume.
Noprompt
No prompt for confirmation
Examples
ARCCONF CREATE 1 LOGICALDRIVE STRIPESIZE 64 MAX 0 1 0 2 0 3 2 NOPROMPT
ARCCONF CREATE 1 JBOD 0 1 NOPROMPT
arcconf datascrub
Description
Toggles the background consistency check modes of the controller.
Syntax
ARCCONF DATASCRUB <Controller#> <on|off|period <DAYS>> [noprompt]
Parameters
Controller#
Controller number.
On
Turns background consistency check on.
Period <DAYS>
Sets the number of days to complete the background consistency check. The minimum value is 10 days
(quick), the maximum is 365 days (slow). Setting the period automaically turns background consistency
check on.
Noprompt
Optional parameter that suppresses the confirmation prompt.
Examples
ARCCONF DATASCRUB 1 PERIOD 30
ARCCONF DATASCRUB 1 OFF
arcconf delete
Description
Deletes a logical drive, JBOD, or maxCache logical device. All data stored on the logical drive or JBOD
will be lost. Spanned drives cannot be deleted with this function.
Syntax
ARCCONF DELETE <Controller#> LOGICALDRIVE <LogicalDrive#> <LD#> <LD#> [noprompt]
ARCCONF DELETE <Controller#> JBOD <CHANNEL# DRIVE#> [CHANNEL# DRIVE#] ...
[noprompt]
ARCCONF DELETE <Controller#> LOGICALDRIVE|JBOD ALL [noprompt]
ARCCONF DELETE <Controller#> MAXCACHE
Proprietary and Confidential to PMC-Sierra, Inc.
19
Document No.: CDP-00276-01-A Rev. A, Issue:
Advertisement
Table of Contents
