Miele H 248 Operating Instructions Manual page 16

Before using for the first time
When the appliance is first connected
to the power supply, or after a power
cut "12:00" and the symbols "f" and
")" flash in the display.
Press the buttons "f" and ")" at
the same time.
The following light up
– "12:00" in the display,
– the "+/–" button indicator light.
Now immediately, while the indicator
light for the "+/–" button is still on,
enter the time in hours:minutes with
the "+" or "–" buttons.
When the indicator light for the "+/–" but-
ton goes out, the time of day has been
set and the display will change at one-
minute intervals. The colon flashes.
If your appliance is also fitted with the
receiver for the radio controlled clock
signal, the time is set automatically
(see separate operating instructions for
the radio controlled clock).
16
Wipe out the
warm water and a little washing up
liquid. Dry with a clean, dry cloth.
Do not close the oven door until the
oven interior is dry.
Rinse the
first use. Running the oven for at least
an hour at a high temperature will dissi-
pate this more quickly.
Turn the oven function selector to
"Fan Heat D".
Now immediately, while the indicator
light for the "+/–" button is still on, alter
the oven temperature.
Select the highest temperature with
the "+" button.
Depending on model, the timer can
also be used to set the finish time.
Ensure the room is well ventilated
during this process.
using
.
have a slight smell on