Installing On A Vmware Guest Os; Starting The Command Line Utility - Adaptec CDP-00276-01-A User Manual

10. Reboot the system.
11. Continue the installation with

Installing on a VMware Guest OS

Note: You must complete the steps in
Installing on VMware ESXi 5.0
To install ARCCONF on a VMware guest operating system:
1. Insert the Adaptec Installation DVD.
2. Go to the ASM-MANAGER-GOS directory for the remote operating system you want to install.
3. Type one of the following commands, depending on the operating system:
Options Description
Linux
./StorMan-9.00-19098.esx86_64.bin
Windows
setup_asm_esx_x64.exe

Starting the Command Line Utility

1. To start ARCCONF, enter one of the following commands:
Options Description
Windows
<install_dir>\arcconf.exe
Linux
/usr/<install_dir>/arcconf
Solaris
/usr/StorMan/arcconf
FreeBSD
/<install_dir>/arcconf
VMware
/usr/StorMan/arcconf
where Install_dir is the directory where the utility is installed.
2. To see a list of available commands, type
Proprietary and Confidential to PMC-Sierra, Inc.
Document No.: CDP-00276-01-A Rev. A, Issue:
Adaptec RAID Controller Command Line Utility User's Guide
Installing on a VMware Guest OS
Installing on VMware ESX 4.1
on page 13 before continuing.
at the prompt.
ARCCONF
on page 14.
on page 12 or
14