Table of Contents
Advertisement
Adaptec RAID Controller Command Line Utility User's Guide
arcconf atapassword
Description
Sets or clears the Secure Erase password for SATA drives. See arcconf task for more information about
Secure Erase.
Syntax
ARCCONF ATAPASSWORD <Controller#> SET <new password> <Channel# ID#> ...
ARCCONF ATAPASSWORD <Controller#> CLEAR <current password> <Channel# ID#> ...
Parameters
new password | current password
Channel/ID lists the space-delimited channel number and device number (ID) pairs for each drive on
which to set or clear the password.
Channel/ID
Lists the space-delimited channel number and device number (ID) pairs for each drive on which to set
or clear the password.
Examples
ARCCONF ATAPASSWORD 1 SET uR8ryx 0 1
ARCCONF ATAPASSWORD 1 CLEAR uR8ryx 0 1
arcconf copyback
Description
Enables or disables the copyback feature, which attempts to keep drives in the original slot order after
rebuilds.
Syntax
ARCCONF COPYBACK <Controller#> <ON|OFF>
Parameters
Controller#
The controller number
On enables the copyback feature
Off disables the copyback feature
Examples
ARCCONF COPYBACK 1 ON
arcconf create
Description
Creates a new logical drive, maxCache Container, or JBOD and, optionally, enables logical drive read
caching, write caching, and maxCache SSD caching. You must provide the channel and device ID of the
physical devices.
Proprietary and Confidential to PMC-Sierra, Inc.
16
Document No.: CDP-00276-01-A Rev. A, Issue:
Advertisement
Table of Contents
