Table of Contents
Advertisement
Parameters
Controller#
Controller number.
Tabular
Creates output in tabular format.
Examples
ARCCONF GETSMARTSTATS 1
ARCCONF GETSMARTSTATS 1 TABULAR
arcconf getstatus
Description
The GETSTATUS function displays the status of any background command that is currently running.
Including information about the most recent rebuild, synchronization, logical-drive migration, and
compaction/expansion. The information includes the type of operation, status, logical drive number,
logical drive size, and percentage of the operation completed.
Note:
1. GETSTATUS reports currently active operations for both ARCCONF commands and
commands issued from the maxView Storage Manager.
2. GETSTATUS reports verify, clear, initialize, and secure erase operations on physical
devices.
3. GETSTATUS only reports active operations. It does not display information if the
operation is completed.
Syntax
ARCCONF GETSTATUS <Controller#>
Parameters
Controller#
Controller# is the controller number
Examples
ARCCONF GETSTATUS 1
arcconf getversion
Description
Lists version information for all controllers or a specific controller's software components, including
information about the BIOS, driver, firmware currently running, and firmware that will run after a reboot.
Note: The firmware version that will run after a reboot is called the "staged" firmware.
Syntax
ARCCONF GETVERSION (use this for information on all controllers)
ARCCONF GETVERSION <Controller#> (use this for information on a specific
controller)
Proprietary and Confidential to PMC-Sierra, Inc.
Document No.: CDP-00276-01-A Rev. A, Issue:
Adaptec RAID Controller Command Line Utility User's Guide
24
Advertisement
Table of Contents
