Installing On Vmware; Starting The Command Line Utility - Adaptec 51245 User Manual

Installing on VMWare

To install ARCCONF on VMWare systems:
Insert the Adaptec Storage Manager Installation CD.
1
Mount the Adaptec Storage Manager installation CD:
2
mount -r /dev/cdrom /mnt/cdrom
Change to the manager directory:
3
ESX Server 3.5:
ESX Server 4.0:
Extract the Linux Adaptec Storage Manager RPM package and install it:
4
rpm --install --nodeps ./StorMan*.rpm
Note:
Ignore the note saying "Application can be started by typing /usr/StorMan/
StorMan.sh". VMWare does not support the
Change to the /usr/StorMan directory, then enter this command:
5
chmod +x arcconf
Unmount the Adaptec Storage Manager Installation CD. Refer to your operating system
6
documentation for detailed instructions.

Starting the Command Line Utility

To start
ARCCONF
Windows—
●
Linux—
●
/usr/<install_dir>/arcconf
UnixWare/OpenServer—
●
Solaris—
●
/usr/StorMan/arcconf
FreeBSD—
●
VMWare—
●
Install_dir
To see a list of available commands, type
functions are detailed in the next chapter,
Chapter 1: Getting Started with the Command Line Utility
cd /mnt/cdrom/linux/manager
cd /mnt/cdrom/linux_64/manager
, enter one of the following commands:
<install_dir>\arcconf.exe
/opt/RaidMan/arcconf
/<install_dir>/arcconf
/usr/StorMan/arcconf
is the directory where the utility is installed.
ARCCONF
Adaptec Storage Manager
at the prompt. The utility command
Using the Command Line Utility.
10
●
GUI.