Installing Remote Arcconf On A Windows Guest Os - Adaptec Command Line Utility User Manual

If the package installed successfully, you should see a line like this:
arcconf 1.00-1
Continue the installation with
6
page 13 or Installing Remote ARCCONF on a Linux Guest OS on page

Installing Remote ARCCONF on a Windows Guest OS

Note:
The following instructions assume that you have already created a virtual machine in
VMware and installed the Windows Guest OS. To run Remote ARCCONF on Windows, you must
be logged in as Administrator.
To install Remote ARCCONF on a Windows Guest OS:
On a Windows machine, insert the Adaptec Installation DVD.
1
Start the Remote Desktop Connection utility, then connect to the Windows Guest OS on
2
VMware. (You will be asked for credentials when you connect.)
Navigate to the ASMCD\remote_arcconf\windows directory on the installation DVD, then
3
copy the setup program, setup_remote_arcconf_x32.exe, to a local directory on the
Windows Guest OS.
Double-click setup_remote_arcconf_x32.exe.
4
The installation wizard opens.
Click Next to begin the installation, click I accept the terms..., then click Next.
5
To accept the default installation location, click Next. To choose a different location, click
6
Change, select a location, then click Next.
The Hypervisor Credentials window opens.
Enter the Hypervisor login credentials: IP address, port, username, password, then click
7
Next:
Note:
For the CIMOM port, the default value (5989) is recommended for most
installations.
Click Install, then Finish.
8
Chapter 1: Getting Started with the Command Line Utility
Adaptec unknown 2011-08-26
Installing Remote ARCCONF on a Windows Guest OS on
13
●
14.