Arcconf Rescan; Arcconf Resetstatisticscounters; Arcconf Romupdate - Adaptec CDP-00276-01-A User Manual

Examples
ARCCONF PLAYCONFIG server1_config.xml playconfig.log FORCE ALL

arcconf rescan

Description
Enables the controller to check for the removal of any disk drives in the ready state and to check for
the connection of any new disk drives to the controller. The command returns when the rescan is
complete.
Syntax
ARCCONF RESCAN <Controller#>
Parameters
Controller#
The controller number
Examples
ARCCONF RESCAN 1

arcconf resetstatisticscounters

Description
Resets statistics counters for a controller. Use this command to clear the counters and create fresh
statistics.
Syntax
ARCCONF RESETSTATISTICSCOUNTERS <Controller#>
Parameters
Controller#
The controller number
Examples
ARCCONF RESETSTATISTICSCOUNTERS 1

arcconf romupdate

Description
Allows new firmware and BIOS to be flashed to the controller. A reboot is required for the new firmware
to take effect.
Note:
1. This function is only supported in Windows and Linux.
Proprietary and Confidential to PMC-Sierra, Inc.
Document No.: CDP-00276-01-A Rev. A, Issue:
Adaptec RAID Controller Command Line Utility User's Guide
30