Utility Menu; Language; Detect Ide; Security Menu - Intergraph InterServe 800 System Setup

Standby Time Out (Minute)
This option specifies the length of a period of system inactivity while in the Full On power
state. When this length of time expires, the system enters the Standby power state. The
settings are Disabled, 4 msec, 8 msec, 12 msec, 16 msec, up to 508 msec, in increments of 4
msec. The Optimal and Fail-Safe settings are Disabled.
Suspend Time Out (Minute)
This option specifies the length of a period of system inactivity while in the Standby power
state. When this length of time expires, the system enters the Suspend power state. The
settings are Disabled, 4 msec, 8 msec, 12 msec, 16 msec, up to 508 msec, in increments of 4
msec. The Optimal and Fail-Safe settings are Disabled.

Utility Menu

Use the following utilities to change the language used in BIOS Setup, and to automatically
detect and configure any IDE drives you connect to the system. For information on setting
an IDE device to master or slave, see the documentation accompanying the device.

Language

The default is English.

Detect IDE

This parameter searches for IDE devices connected to the IDE controller. Any IDE drive
found is then made available for you to configure.

Security Menu

The Security Menu allows you to change the system password for the Supervisor and the
User.

Supervisor, User

To prevent unauthorized users from accessing the AMIBIOS Setup program, you can enter a
password on both of the Supervisor and User menus. If you do not enter a password, then
the system will not prompt users for a password when they start AMIBIOS Setup. These
passwords do not affect the system logon password.
77