Table of Contents
Advertisement
Standby and Suspend timeout timers if activity occurs on the specified
IRQ line. The settings for each of these options are Monitor or Ignore.
The Optimal and Fail-safe default settings are Monitor for all devices.
LAN Wake-up
When this option is Enabled, the system will wake up when a signal is
received on the Wake-on LAN header. In order for this wake up
function to work, the system must have been brought up at least past
the POST before it was last shut down (i.e. if you turn the system off
before the POST, the registry will not be set, and the system will not be
able to wake up using this function). This function requires an ATX
2.01 compliant power supply with 5V standby (STB5V) current of at
least 800mA. The settings are Enabled or Disabled. The Optimal and
Fail-safe default settings are Enabled.
PC98 Power LED
When this option is Enabled, your power LED will turn to yellow when
your system is in Suspend mode. Note that if you do not have a two-
color LED, your LED will turn off when the system is in Suspend mode
if this option is set to Enabled. The settings are Enabled or Disabled.
The Optimal and Fail-safe default settings are Disabled.
FAN OFF at Suspend
If this option is Enabled, the CPU fan will turn off when the system is
in Suspend mode. If Disabled, the CPU fan will remain on while the
system is in Suspend mode. The settings are Enabled or Disabled. The
Optimal and Fail-safe default settings are Enabled.
RTC Wake-up
If Enabled, this option allows you to set an hour and minute for the
system to wake up. The next two fields allow you to choose the wake
up time. Note that the time fields will not be available if this option is
set to Disabled. In order for this wake up function to work, the system
must have been brought up at least past the POST before it was last
shut down (i.e. if you turn the system off before the POST, the registry
will not be set, and the system will not be able to wake up using this
function). The settings are Enabled or Disabled. The Optimal and Fail-
safe default settings are Disabled.
http://www.tyan.com
59
Advertisement
Table of Contents
