Table of Contents
Advertisement
Chapter 4
BIOS Configuration
default settings are Disabled.
Boot Up Num-Lock
Set this option to Off to turn the Num Lock key off when the computer
is booted so you can use the arrow keys on both the numeric keypad
and the keyboard. The settings are On or Off. The default settings are
On.
PS/2 Mouse Support
Set this option to Enabled to enable AMIBIOS support for a PS/2-type
mouse. The BIOS will allocate IRQ12 for the PS/2 mouse. The
settings are Enabled or Disabled. The Optimal and Fail-safe default
settings are Enabled.
Primary Display
This option configures the type of monitor attached to the computer.
The settings are Absent, VGA/EGA, CGA40x25, CGA80x25, or
Mono. The Optimal and Fail-safe default settings are VGA/EGA.
Password Check
This option enables password checking every time the system boots or
when you run AMIBIOS Setup. If Always is chosen, a user password
prompt appears every time the computer is turned on. If Setup is
chosen, the password prompt appears if AMIBIOS is executed. See
the Advanced Setup chapter for instructions on changing a password.
The Optimal and Fail-safe default settings are Setup.
Boot To OS/2
Set this option to Yes if you are running an OS/2 operating system and
using more than 64 MB of system memory on the motherboard. The
settings are Yes or No. The Optimal and Fail-safe default settings are
No.
Internal Cache
This option sets the type of caching algorithm used by the L1 internal
cache memory on the CPU. The settings are Disabled, WriteThru, or
WriteBack. The Optimal and Fail-safe default settings are WriteBack.
48
http://www.tyan.com
Advertisement
Table of Contents
