Table of Contents
Advertisement
installed. The settings are Auto, 2 SCLKs or 3 SCLKs. The Optimal
default setting is Auto. The Fail-Safe default setting is 3 SCLKs.
SDRAM RAS# Precharge
(CHANGE) This option specifies the length of the RAS precharge part
of the DRAM system memory access cycle when SDRAM system
memory is installed in this computer. The settings are Auto, 2 SCLKs,
or 3 SCLKs. The Optimal default setting is Auto. The Fail-safe default
setting is 3 CLKs.
Power Down SDRAM
If this option is set to Enabled, the SDRAM Power Down feature is
enabled. The settings are Enabled or Disabled. The Optimal and Fail-
safe default settings are Enabled.
ACPI Control Register
Set this option to Enabled to enable the ACPI (Advanced Configuration
and Power Interface) control register. The settings are Enabled or
Disabled. The Optimal and Fail-safe default settings are Enabled.
Gated Clock
Set this option to Enabled to enable the gated clock. The settings are
Enabled or Disabled. The Optimal and Fail-safe default settings are
Disabled.
Graphics Aperture Size
This option specifies the amount of system memory that can be used by
the Accelerated Graphics Port (AGP). The settings are 4 MB, 8 MB,
16 MB, 32 MB, 64 MB, 128 MB, or 256 MB. The Optimal and Fail-
safe default settings are 64 MB.
Search for MDA Resources
Set this option to Yes to let AMIBIOS search for MDA resources. The
settings are Yes or No. The Optimal and Fail-safe default settings are
Yes.
http://www.tyan.com
53
Advertisement
Table of Contents
