Table of Contents
Advertisement
Figure 7 shows the USB ports and Figure 8 the PS/2 ports.
Installing your add-in cards is relatively simple but...
there are a few rules you need to follow when plugging in a card. In
order to assure proper operation and a quick installation, adhere to these
guidelines:
•
If you are going to install a PCI-Bus interface card on your system,
be aware that any one of the two PCI slots can support a Master
or Slave device.
•
NEVER force a card into a slot. If it doesn't fit, look at the socket
on the computer to make sure there are no wires or other
obstructions to the slot.
important!
•
NEVER plug an ISA card into a PCI slot or a PCI card in an ISA
slot. You will void your warranty and damage your system board if
you do this.
•
When plugging the card in, especially when installing long cards,
try to push the entire card in at one time. Don't force one end of
the card into the socket first and then the other. This will create a
http://www.tyan.com
Figure 7
Figure 8
17
Advertisement
Table of Contents
