Table of Contents
Advertisement
Figure 9
To install your DIMMs, line your module up so that the pins fit into the
slot. There is only one way that your DIMM can fit properly. Make sure
that the short row of pins is lined up with the short gap in the DIMM
slot. Figure 9 shows how to sit the DIMM into its slot. To insert the
DIMM, push down vertically on the module with even force, as shown
in the photo. Do not shove one end in first; doing so will bend the
DIMM pins.
To lock the DIMM into place, push the plastic clips on either end of the
important!
slot onto the notches in the ends of the DIMM (see Figure 10 on the
following page). To remove your DIMM, simply pull the clips back,
and pull up on the module.
http://www.tyan.com
19
Advertisement
Table of Contents
