Editing Tcp/Ip Options (With Ethernet Encapsulation) - ZyXEL Communications Prestige 310 User Manual

Prestige 310 Broadband Sharing Gateway
FIELD
Telco Option
Allocated Budget
(min)
Period(hr)
Schedules
Nailed-Up
Connections
Session Options
Idle Timeout
4.3

Editing TCP/IP Options (with Ethernet Encapsulation)

Move the cursor to the Edit IP field in Menu 11.1, then press the [SPACE BAR] to set the value to Yes.
Press [ENTER] to open Menu 11.3 — Network Layer Options.
4-6
DESCRIPTION
The field sets a ceiling for outgoing call time for this
remote node. The default for this field is 0 meaning no
budget control.
This field is the time period that the budget should be
reset. For example, if we are allowed to call this remote
node for a maximum of 10 minutes every hour, then the
Allocated Budget(min) is (10 minutes) and the
Period(hr) is 1 (hour).
You can apply up to four schedule sets here. For more
details please refer to the Call Scheduling chapter.
This field specifies if you want to make the connection to
this remote node a nailed-up connection. More details
are given earlier in this section.
This value specifies the idle time (i.e., the length of time
there is no traffic from the Prestige to the remote node)
in seconds that can elapse before the Prestige
automatically disconnects the PPPoE connection. This
option only applies when the Prestige initiates the call.
EXAMPLE
10
1
300 seconds
(default)
Remote Node Setup