Internal Sptgen File Modification - Important Points To Remember; Figure 12-1 Configuration Text File Format - Column Descriptions - ZyXEL Communications Prestige 310 User Manual

Prestige 310 Broadband Sharing Gateway
This is the name
of the menu.
/ Menu 1 General Setup
100000000 = Configured
100000001 = System Name
100000004 = Route IP
100000007 = Domain Name Configured
100000009 = Domain Name Manual
100000010 = Domain Name
This is the Field
Identification Number
column.
This column
numerically identifies
the Field Name column
entries.
Example: 100000000
Figure 12-1 Configuration Text File Format — Column Descriptions
DO NOT alter or delete any field except parameters in the Input column.
For more text file examples, refer to the Internal SPTGEN appendix.

12.1.1 Internal SPTGEN File Modification - Important Points to Remember

•
Entries in the Input column must not exceed 40 characters per line. If your input exceeds this limit,
make sure you press [ENTER] to start a new line.
•
Each parameter you enter must be preceded by one "="sign and one space.
•
Some parameters are dependent on others. For example, if you disable the Configured field in menu 1
(see Figure 12-1), then you disable every field in this menu.
12-2
This is the Field Name column.
This is the name of the field as
seen in the corresponding SMT
screen. Example: Configured
This is the Parameter Values
Allowed column.
This column defines acceptable
parameters. Parameters are usually
numbers, but can sometimes be
strings (<Str> indicates a string). All
parameters should be entered in the
Input column.
Example: <0(No) | 1(Yes)>
One "=" sign, followed by
one space, must precede
everything you input.
<0(No)| 1(Yes)>
<Str>
<0(No)| 1(Yes)>
<0:No | 1:Yes>
<0:No | 1:Yes>
<Str>
= 1
= P310
= 1
= 1
= 0
=
The Input column.
Input values to the
right of the "="
sign.
Make sure one
equal sign,
followed by one
space, precedes
your input.
Internal SPTGEN