Time And Date Setting; Figure 11-5 Call History; Table 11-2 Call History Fields - ZyXEL Communications Prestige 310 User Manual

Prestige 310 Broadband Sharing Gateway
Phone Number
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
FIELD
Phone Number
Dir
Rate
#call
Max
Min
Total
You may enter an entry number to delete it or '"0" to exit.

11.3 Time and Date Setting

There is no Real Time Chip (RTC) in the Prestige, so there is a software mechanism to set the time manually
or get the current time and date from an external server when you turn on your Prestige. Menu 24.10 allows
you to update the time and date settings of your Prestige. The real time is then displayed in the Prestige error
logs and firewall logs. If you do not choose a time service protocol that your timeserver will send when you
turn on the Prestige, then you can enter the time manually but each time the system is booted, the time and
date will be reset to 2000/01/01 00:00:00.
Select menu 24 in the main menu to open Menu 24 — System Maintenance, as shown next.
11-4
Menu 24.9.2 - Call History
Dir Rate
Enter Entry to Delete(0 to exit):

Figure 11-5 Call History

Table 11-2 Call History Fields

The PPPoE service names are shown here.
This shows whether the call was incoming or outgoing.
This is the transfer rate of the call.
This is the number of calls made to or received from that telephone
number.
This is the length of time of the longest telephone call.
This is the length of time of the shortest telephone call.
This is the total length of time of all the telephone calls to/from that
telephone number.
#call Max
DESCRIPTION
System Maintenance and Information
Min Total