Manual Mode Spanning - Teledyne 2000A-EU Operating Instructions Manual

Thermal conductivity analyzer

Hide thumbs

Table Of Contents

Table of Contents

Thermal Conductivity Analyzer

arrow keys to toggle between

appears, blinking, on the display.

Press Enter to move to the next screen.

Use the < > arrow keys to toggle between the span concentration value

and the units field (%/ppm). Use the

units, as necessary. When you have set the concentration of the span gas you are

using, press Enter to begin the Span calibration.

The beginning span value is shown in the upper left corner of the display.

As the span reading settles, the screen displays and updates information on

. Spanning automatically ends when the span output corresponds, within

tolerance, to the value of the span gas concentration. Then the instrument auto-

matically returns to the analyze mode.

Press Span to start the Span function. The screen that appears allows

you to select whether the span calibration is to be performed automatically or

manually.

Use the

when

screen.

Use the < > arrow keys to toggle between the span concentration value

and the units field (%/ppm). Use the

units, as necessary. When you have set the concentration of the span gas you are

using, press Enter to begin the Span calibration.

Press Enter to enter the span value into the system and begin the span

calibration.

4.4.2.2