4 Operation
the appropriate point in the procedure, in a
ton names are printed in Oblique type.
4.3
The System Function
The subfuctions of the System function are described below. Specific
procedures for their use follow the descriptions:
•
and/or start an AUTO-CAL.
•
: Security can be established by choosing a 3 digit
password (
unique password is assigned and activated, the operator MUST
enter the UNIQUE password to gain access to set-up functions
which alter the instrument's operation.
•
with analyzer settings.
•
: Select and enter
additional subfunctions listed.
•
of instrument.
•
the end user. Used to define up to three analysis ranges and a
calibration range (including impurity, background, low end of range,
high end of range, and % or ppm units).
•
check the integrity of the power supply, output boards, sensor
cell, and preamplifiers.
•
end user. Used to linearize the output for the range of interest.
4-4
: Used to define an automatic calibration sequence
) from the standard ASCII character set. Once a
: Logging out prevents an unauthorized tampering
: Displays Manufacturer, Model, and Software Version
: A restricted function, not generally accessed by
: The instrument performs a self-diagnostic test to
: A restricted function, not generally accessed by the
Teledyne Analytical Instruments
type style. Pushbut-
to get a new screen with
Model 2000A-EU