GBC Arctic Titan 165 Manual page 8

Arctic Titan 165 Operation and Maintenance Manual
J. Roller Pressure Handle: Fig (4). Adjusts the amount of roller pressure needed for
various laminating and mounting applications. When the unit is not in use the handle
should always be in the Upper "Mounting" position.
J
Figure 4
K. Brake (Tension) Adjustment Knob: Fig (5). Allows the operator to increase or
decrease film web tension as needed to reduce curl and wrinkles.
L. Film Slitter: Located on the rear of the machine to slit film as it exits the rear of the
machine.
M. Rewind Power Switch: Located on the left side of the rewind unit, it toggles power on
and off to the rewind motor.
N. Emergency Stop Switch: Located on the front and the rear of the machine, it cuts
power to all motors. The Emergency Stop Switches should only be used in
emergency situations.
© GBC Films Group October 2000
Figure 5
K
Page 7