Mitsubishi Electric DLP UD8400U User Manual page 29

Viewing video images (continued)
D. Projecting images
Preparation:
LAMP 2 indicator
POWER indicator
LAMP 1 indicator
Main power switch
1. Put the projector into standby mode by pressing the main power switch. The POWER indicator lights up red.
and the POWER button may not work after the main power switch is turned ON. (The LAMP indicator blinks
green.) After the fan stops rotating, press the POWER button to turn back on the POWER indicator.
2. Turn on the power of the connected video equipment.
3. Press the POWER button.
lens cap.
product malfunction.
in the menu is activated. During the activation, displayed images may be disturbed.
may appear dark and no commands are accepted.
the LAMP indicator blinks red. (See page 71.)
4. Press the ZOOM/FOCUS button to display the ZOOM/FOCUS menu.
5. Adjust with the  or  button to get a fine picture.
switched between FAST and STEP. When FAST is selected, the speed of focus controlled by the  or  button
becomes fast, and it becomes slow when STEP is selected.
6. Select an input source.
Press the VIDEO/HDMI/SDI button on the projector or the VIDEO, S-VIDEO, HDMI or SDI button on the remote
control that is corresponding to the terminal in use. The input source is switched between VIDEO, S-VIDEO,
HDMI and SDI at every press of the VIDEO/HDMI/SDI button on the projector.
Press the VIDEO/HDMI button on the projector or the VIDEO, S-VIDEO or HDMI button on the remote control
that is corresponding to the terminal in use. The input source is switched between VIDEO, S-VIDEO and HDMI
at every press of the VIDEO/HDMI button on the projector.
signal, such symptom is not a malfunction.
IN (HDCP) terminal, press the COMPUTER/DVI-D button on the projector to select DVI or press the DVI-D
(HDCP) button on the remote control.
COMPUTER/COMPONENT VIDEO IN-2 terminal, press the COMPUTER/DVI-D button on the projector or the
COMPUTER 1 or COMPUTER 2 button on the remote control.
POWER button
(ON/STANDBY)
, , ,  buttons
COMPUTER/DVI-D button
ENTER button
ZOOM/FOCUS button
LENS SHIFT button
POWER button (ON/STANDBY)
COMPUTER 1, 2 buttons
VIDEO/HDMI/SDI button
LENS SHIFT button
ZOOM/FOCUS button
EN-29
HDMI button
SDI button
VIDEO button
S-VIDEO button
DVI-D(HDCP) button
ENTER button
, , , 
buttons