Setting up your projector (continued)
Front projection, ceiling mounting
For ceiling mounting, you need the ceiling mount
kit designed for this projector. Ask a specialist for
installation. For details, consult your dealer.
damage caused by use of any non-recommended
ceiling mount kit or installation of the ceiling mount
kit in an improper location.
set IMAGE REVERSE in the INSTALLATION 1 menu
to MIRROR INVERT. See page 34.
images may appear darker than those projected in
the case of tabletop mounting. This isn't a product
When you do not use the projector, be sure to shut
down the main power by the breaker.
are exposed to air emitted by an air conditioning.
Such installation may cause a breakdown.
because it emits hot air from its exhaust vents.
Ask a specialist for installation. For details, consult
INSTALLATION 1 menu to MIRROR. See page 34.
ventilation by the fans, causing damage or failure.
Put a hard board under the projector to facilitate
away from the wall to prevent the air inlet grille and
the air outlet grilles that emit hot air from being
and manners, which may cause ﬁre or electric
installation and ceiling installation)
for ﬂoor installation and ceiling installation)
For use in other than ﬂoor installation and
altitude of 2700 meters or higher (When using
the product at an altitude of 2000 to 2700 meters
above the sea level, set the HIGH ALTITUDE MODE
to HIGH ALTITUDE.). Use at an altitude of 2700
meters or higher may affect the projector's life.