Mitsubishi Electric DLP UD8400U User Manual page 27

Viewing video images (continued)
Projector + DVD player or HDTV decoder
Some DVD players have an output connector for 3-line fitting (Y, C
projector, use the COMPUTER/COMPONENT VIDEO IN-2 terminals.
DVD player or HDTV decoder
Y C (P )
B B
G B R
and B output terminals, set COMPUTER INPUT to RGB in the SIGNAL menu. (See page 39.)
Connecting to video equipment having a HDMI terminal or DVI-D terminal
You can project high-quality images by connecting the COMPUTER/COMPONENT VIDEO DVI-D IN (HDCP) terminal
of this projector to video equipment having a HDMI output terminal or DVI-D terminal. In addition, this projector
supports HDCP and is able to receive encrypted digital video data that are output from DVD players.
HDCP (High-bandwidth Digital Content Protection), developed by Intel Corporation, is a method to encrypt digital
video data for the purpose of copy protection.
HDMI (High-Definition Multimedia Interface) is fully backward compatible with computers, displays and consumer
electronics devices incorporating the DVI standards.
This projector can be linked with video devices equipped with HDMI output terminal or DVI-D output terminal.
However, with some of them, this projector may not display any image or not operate correctly.
If this projector doesn't display any image or not operate correctly, see the operation manual of the video device
for its connection.
Use of a long cable may decrease the quality of projected images.
Connection (for video equipment having an HDMI terminal)
Use a commercially available HDMI (with HDMI logo) cable.
Equipment having an
HDMI terminal
C (P )
R R
BNC-RCA connector (option)
BNC cable (option)
, and P are given as examples of when a HDTV decoder is connected.
B R
To HDMI terminal
HDMI (with HDMI logo) cable (option)
, C ). When connecting such DVD player with this
B R
EN-27
COMPUTER/COMPONENT
VIDEO IN-2
HDMI IN