Abnormal sound is
Lens shift doesn't
If the following problem occurs after the lamp is replaced, check the following ﬁrst.
The projector does not
The LAMP indicator
This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System.
Refer to the information that came with the Kensington System for instructions on how to use it to secure the
projector. Please contact Kensington Technology Group below.
Kensington Technology Group
2855 Campus Drive
San Mateo, CA 94403, U.S.A.
Phone: +1- (650)572-2700
occasions. Such symptom is not a malfunction.
switched, such symptom is not a malfunction.
Fax: +1- (650)572-9675
(See page 34.)