About Color Temperature - Mitsubishi Electric DLP UD8400U User Manual

Adjusting projected images (continued)
To cancel the menu:
7. Press the MENU button.
To enable the stored color temperature:
1. Set COLOR TEMP. to USER

About color temperature

Color temperature is a way to show the differences in white. White of which temperature is low appears reddish.
When the color temperature rises, white appears bluish. For example, you can change the color temperature using
the following procedures.
To raise the color temperature: Increase the CONTRAST B (blue) and decrease the CONTRAST R (red).
To reduce the color temperature: Decrease the CONTRAST B (blue) and increase the CONTRAST R (red).
obtained even when you maximize CONTRAST in the IMAGE menu.
Color Enhancer
You can set the user-defined balance between the brightness and hue using the menu.
(See page 32 for menu setting.)
With the IMAGE menu:
1. Display the IMAGE menu.
2. Select COLOR ENHANCER by pressing the  or  button.
3. Select USER or MULTI-SCREEN
Important:
MATCHING is MANUAL or MEASURE in the MULTI-SCREEN menu.
4. Press the ENTER button.
The detailed menu for the color enhancer is displayed.
5. Select an item you want to set by pressing the  or  button.
GAMMA mode
Use this item to set the gamma optimally.
When USER is selected:
DYNAMIC ...... Select when viewing images supplied from the computer.
NATURAL ...... Select when viewing images supplied from the video device.
DETAIL ......... Select when viewing images of which brightness should be kept relatively low, such as movies and
music performance.
When MULTI-SCREEN is selected:
1.8/2.0/2.2 Select the gamma characteristics from 1.8th, 2.0th, and 2.2nd power.
BrilliantColor™
Use this item to make the colors having medium brightness such as yellow and skin tone look natural. Press the 
button to decrease the value to lessen the effect. Press the  button to increase the value to heighten the effect.
(BrilliantColor™ doesn't work at value 0.)
6. Select a setting value by pressing the  or  button.
disabled and you can reproduce true-to-life images.
Important:
With the remote control:
1. Press the CE button on the remote control.
A window for color enhancer adjustment appears on the upper right of the screen.
2. Press the  or  button to select USER
3. Press the ENTER button.
4. Press the  or  button to select GAMMA MODE or BrilliantColor™.
5. Press the  or  button to adjust the selected item.
in the IMAGE menu.
by pressing the  or  button.
or MULTI-SCREEN
EN-43
COLOR ENHANCER
When USER is selected:
COLOR ENHANCER–USER
GAMMA MODE
BrilliantColor
When MULTI-SCREEN is selected:
COLOR ENHANCER–MULTI-SCREEN
GAMMA MODE
BrilliantColor
.
AUTO
DYNAMIC
TM
10
2.0
TM
0