3Ware 720-0192-00 Manual page 42

x
/c show
www.3ware.com
/cx add rebuild=ddd:hh:duration
/cx add verify=ddd:hh:duration
/cx add selftest=ddd:hh
/cx set dpmstat=on|off
/cx del rebuild=slot_id
/cx del verify=slot_id
/cx del selftest=slot_id
/cx set exportjbod=on|off
/cx set ondegrade=cacheoff|follow (9500S only)
/cx set spinup=nn
/cx set stagger=nn
/cx set autocarve=on|off
/cx set carvesize=[1024...32768] (9000 series SX/SE/SA only)
/cx set rebuild=enable|disable|1..5 (9000 series)
/cx set rebuildmode=<adaptive|lowlatency> (9000 series SE/SA
only)
/cx set rebuildrate=<1..5>
/cx set autorebuild=on|off
/cx set autodetect=on|off disk=<p:-p>|all
/cx set verify=enable|disable|1..5 (9000 series)
/cx set verify=advanced|basic|1..5 (9000 series SE/SA only)
/cx set verifymode=<adaptive|lowlatency> (9000 series SE/SA
only)
/cx set verifyrate=<1..5>
/cx set verify=basic [pref=ddd:hh] (9000 series SE/SA only)
/cx set selftest=enable|disable [task=UDMA|SMART](9000
series)
/cx flush
/cx update fw=filename_with_path [force] (9000 series)
/cx commit
/cx start mediascan (7000/8000 only)
/cx stop mediascan
/cx rescan [noscan]
This command shows summary information on the specified controller /cx.
This information is organized into a report containing two to three parts:
• A Unit summary listing all present units
• A Port summary section listing of all ports (or virtual ports) and disks
attached to them.
• A BBU summary section listing, if a BBU is installed on the controller.
Controller Object Commands
(9000 series)
(9000 series)
(9000 series)
(9000 series SX/SE/SA only)
(9000 series)
(9000 series)
(9000 series)
(9000 series)
(9000 series)
(9000 series)
(9000 series SX/SE/SA only)
(9000 series SE/SA only)
(9000 series SX/SE/SA only)
(9000 series SE/SA only)
(Windows only. Also known as shutdown)
(7000/8000 only)
34