www.3ware.com
Example of clearing Running Average and Histdata statistics:
//localhost> /c0/p3 set dpmstat=clear type=ra
Clearing Drive Performance Monitor running average data on /c0/p3 ... Done.
Please note this clears the Running Average and Histogram data.
Example of clearing when I/O traffic has been stopped
If I/O traffic to the drive has been stopped, after clearing, a subsequent request
to show the running average statistics would show all zeros.
//localhost> /c0/p3 show dpmstat type=ra
Port
Status
Unit
--------------------------------------------------------------
p3
OK
u0
Similarly, the display for Histogram data would also be all zeros.
Queue
Xfer
Depth
IOPs
Rate(MB/s)
0
0
0.000
Port Object Commands
Resp
Time(ms)
0
116