Chapter 2. CLI Syntax Reference
21
Table 5: Common Tasks Mapped to CLI Commands
Task
Set policies for a controller
•
Modify staggered spinup
•
Disable write cache on unit
degrade
•
Enable/disable autocarving
•
Enable/disable autorebuild
•
Set the autocarve volume size
•
Enable/disable drive
performance monitoring
statistics (dpmstat)
Unit Configuration Tasks
View information about a unit
Create a new unit
Create a hot spare
Enable/disable unit write cache
Enable Basic or Intelligent read
cache, or disable both.
Set the queue policy
Set the rapid RAID recovery policy
Set the storsave profile
Unit Configuration Changes
Change RAID level
Change stripe size
Expand unit capacity
Delete a unit
Remove a unit (export)
Name a unit
Controller Maintenance Tasks
Update controller with new
firmware
Add a time slot to a rebuild
schedule
3ware SAS/SATA RAID Controller CLI Guide, Version 9.5.2
CLI Command
/cx set stagger and /cx set spinup
/cx set ondegrade
/cx set autocarve
/cx set autorebuild
/cx set carvesize
/cx set dpmstat
/cx/ux show
/cx add
/cx add
/cx/ux set cache
/cx/ux set wrcache
/cx/ux set rdcache
/cx/ux set qpolicy
/cx/ux set rapidrecovery
/cx/ux set storsave
/cx/ux migrate
/cx/ux migrate
/cx/ux migrate
/cx/ux del
/cx/ux remove
/cx/ux set name
/cx update
/cx add rebuild
Page
77
77
77
78
77
70
82
58
58
94
94
96
97
97
99
99
99
89
89
96
64
66