3Ware 720-0192-00 Manual page 14

www.3ware.com
• Press Enter to begin installation.
For FreeBSD
• Navigate to the appropriate FreeBSD directory on the 3ware CD,
depending on the FreeBSD version you have:
/packages/installers/tools/freebsd/6.x/x86
/packages/installers/tools/freebsd/6.x/x86_64
/packages/installers/tools/freebsd/7.x/x86
/packages/installers/tools/freebsd/7.x/x86_64
• Type the appropriate command, depending on the FreeBSD version
you have:
./setupFreeBSD6_x86.sh -console
./setupFreeBSD6_x64.sh -console
./setupFreeBSD7_x86.sh -console
./setupFreeBSD7_x64.sh -console
• Press Enter to begin installation.
Step through the installation screens in text mode. On the 3ware Disk
Management Tools screen, make sure that Command Line Interface
(tw_cli) is selected.
The default directory location used by 3ware is
For Linux and FreeBSD, more detailed information about using this
installer is supplied in Appendix B of 3ware SAS/SATA RAID Software
User Guide, Version 9.5.1.
For OpenSolaris, more detailed information is available in 3ware SAS/
SATA RAID Software User Guide Addendum for OpenSolaris.
For OpenSolaris
• Navigate to the following directory
packages/installers/tools/OpenSolaris
• Type:
./setupSolaris_x86.bin -console
• Press Enter to begin installation.
For OpenSolaris, more detailed information is available in 3ware SAS/
SATA RAID Software User Guide Addendum for OpenSolaris.
• If you are using a graphical user interface, insert and mount
Use a GUI.
the 3ware CD.
, at the 3ware menu, click
Under Linux
menu does not appear automatically, open a command window and type
./autorun from the CD directory.
Under FreeBSD or OpenSolaris
setup commands described above the command line option, without the
-console option
Installing the 3ware CLI
/opt/AMCC/CLI/tw_cli.
. If the 3ware
Install Software
, open a command window and use the
6