Changing Settings At A Later Date - Meridian C61R Installation Manual

 
R o o m

Changing settings at a later date

c o r r e c t i o n
This section describes how to change the room correction or
configuration settings of the digital surround controller at a later
date, subsequent to storing the original version.
Note: You can only edit or add to existing profiles if you have the
MSL file originally used to design the profile. If you do not have the
original MSL file you will need to make new measurements, create
new profiles, and then store these to the digital surround controller.
To edit an existing profile, or add a new profile
• Run the Meridian Configuration Program and open the MSL file
used to create the original profiles.
If you have changed settings on the digital surround controller
since the original profiles were made, and you want to retain these
changes:
• On the File menu, click Save as to save the MSL file under a
new name.
To fetch the settings from the digital surround controller:
• On the Products page, right-click the controller, then click
Fetch... on the context menu.
• Step forward to the Room correction page in the Breadcrumb
Trail.
• Select the Profiles tab, and proceed as described in Editing
filters, page 75.
To change other settings if you have the original MSL file
• Run the Meridian Configuration Program and open the original
MSL file.
If you want to keep the original settings:
• On the File menu, click Save as to save a copy of the MSL file
under a new name.
• Change the settings as required and store the new settings to
the digital surround controller.
For more information about changing configuration settings using
the Meridian Configuration Program refer to the Installation Guide
for your product.
To change other settings if you have lost the original MSL
file
If the original MSL file is not available you will be able to change
all non-room correction settings, and which room correction profile
you want to use with a given preset.
• Start a new document.
• On the File menu, click Fetch... to fetch the settings from the
digital surround controller.
The newly created file will contain the profile labels and these can
be used to choose the profile you want to use with a given preset.
It will not contain measurements or profile data for Meridian Room
Correction. If you use Meridian Room Correction to create new