Table of Contents
Advertisement
M e r i d i a n
C o n f i g u r a t i o n
P r o g r a m
Changing the value of a property
• Click the value of the property.
• Choose an option from the drop-down list:
If it is a numeric property you will get a spin button rather than a
drop-down list:
If it is an on/off property you can click the checkbox to change the
value:
If you have changed the value of a property an asterisk (*) is
shown after its name.
Reverting a property to its default value
• Right-click the property, then click Revert to Default on the
context menu:
The menu option shows the default value.
Configuring 800 Series products
Adding an 800 Series controller
If you are adding an 800 Series controller a dialogue box will allow
you to specify one of the product's standard card configurations.
Alternatively select Minimal to add a minimum set of cards at this
stage, in which case you will be prompted to add further cards as
you make connections to the product:
Adding cards
You will be automatically prompted to add cards as required
when you add sources or speakers to the 800 Series product.
Alternatively you can add cards explicitly if you prefer:
Either:
• Drag the appropriate card icon from the 861 Cards or 800
Cards tab in the Resource Bar (to the left of the Products
page).
Or:
• Right-click the product icon, then click Add Card... on the
context menu:
Advertisement
Table of Contents
